Flapper Adapter 5/8"-11 to 1/4" Collet – Angle Grinder to Die Grinder, Made in USA

• Angle Grinder to Die Grinder: Converts a 5/8"-11 angle grinder into a 1/4" collet tool.
• 1/4" Collet: Fits carbide burrs, flap wheels, sanding drums and polishing wheels.
• 303 Stainless Steel: Solid, wear-resistant build.
• Low Vibration: Precision-machined for balance at grinder speeds.
• Made in USA: Precision-crafted for a consistent fit.
• Lifetime Warranty: Backed for life.

• Grinders: Angle grinders with a standard 5/8"-11 spindle.
• Accessories: 1/4" shank carbide burrs, flap wheels, sanding drums, polishing wheels and cutoff wheels.
• Materials: Steel, stainless steel, aluminum and other metals.
• Users: Welders, fabricators, repair shops and DIY metalworkers.

• Unplug First: Disconnect the grinder or remove the battery and take off the guard nut and wheel.
• Thread It On: Screw the adapter onto the 5/8"-11 spindle and tighten it fully.
• Mount the Accessory: Insert the 1/4" shank as deep as it will go and tighten the collet securely.
• Check the Speed Rating: Use only accessories rated at or above your grinder's no-load RPM.
• Work Safely: Wear eye and face protection and keep both hands on the grinder.

• Weld Cleanup: Smooth and blend welds with carbide burrs or flap wheels.
• Deburring: Clean edges and holes on metal parts.
• Surface Prep: Sanding drums and discs for rust and paint removal.
• Polishing: Polishing and felt wheels for finishing stainless and aluminum.
• Tight Spaces: Reach detail areas a full-size wheel cannot.

• Grinder Thread: 5/8"-11 (standard North American angle grinder spindle)
• Collet: 1/4 inch, for 1/4" shank accessories
• Material: 303 stainless steel
• Size: About 2 x 1 x 1 inches
• Made in: USA
• Warranty: Lifetime
• In the Box: 1 flapper adapter

Q: Will it fit my angle grinder?
A: It fits angle grinders with the standard 5/8"-11 spindle thread, which is used on most angle grinders sold in North America. Check your grinder's spindle thread before ordering.
Q: What accessories can I use?
A: Any accessory with a 1/4" shank, such as carbide burrs, flap wheels, sanding drums and polishing wheels.
Q: Is it better than buying a die grinder?
A: It lets you do die-grinder work with the angle grinder you already own, so you don't need to buy and store another tool.
Q: What is it made of?
A: Solid 303 stainless steel, precision-machined in the USA.
Q: Does it come with a warranty?
A: Yes. The Flapper Adapter has a lifetime warranty.
Q: Do I need to check accessory speed ratings?
A: Yes. Angle grinders run fast, so use only accessories rated at or above your grinder's no-load RPM.