Flex Shaft Attachment, 42" for Rotary Tools – 1/8" Collet with Comfort-Grip Handpiece

• 42" Shaft: Flexible, with 5" bend radius.
• Comfort-Grip Handpiece: Holds 1/8" bits.
• L Bar Included: For tightening the collet.
• 35,000 RPM: Maximum at no load.

• Materials: Wood, metal, plastic, glass and more.
• Tools: Rotary tools with a standard nose thread (see compatibility list).

• Lubricate: Apply white lithium grease to the core before first use, and regularly after.
• Remove the Nose Cap: Unscrew the collet nut and nose cap from your rotary tool.
• Connect: Insert the shaft core into the tool collet, tighten the collet nut, then screw on the flex shaft connector.
• Fit a Bit: Insert a 1/8" bit in the handpiece and tighten with the L bar. Remove the L bar before use.

• Carving & Engraving: Wood, glass and personalized gifts.
• Detail Work: Miniatures, models and 3D print finishing.
• Restoration: Sanding, cleaning and polishing delicate items.

• Length: 42 inch
• Bend Radius: 5 inch
• Bit Size: 1/8 inch
• Maximum Speed: 35,000 RPM (no load)
• Connection: Standard nose thread
• Included: Flex shaft attachment, L bar for collet
• Fits: Dremel 100, 200, 300, 3000, 4000, 4300, 8220, 8240, 8250, 8260
• Not Compatible: Dremel 2050, 8050, 7000, 7300, 7700

Q: Which rotary tools does it fit?
A: Dremel models 100, 200, 300, 3000, 4000, 4300, 8220, 8240, 8250 and 8260, and other tools with a standard nose thread. It does not fit models 2050, 8050, 7000, 7300 or 7700.
Q: Do I need to lubricate it?
A: Yes. Apply white lithium grease to the core before first use and regularly after.
Q: What size bits does it hold?
A: 1/8 inch.
Q: Why won't the inner core slide out?
A: Don't force it. Hang the shaft vertically for a few hours, warm it gently with a hair dryer, or add a little light oil to the top of the sheath and let it soak. The core slides out from the tool-connection end. Stop if it doesn't move with gentle pressure.