3-Piece Diamond Hole Saw Set 1-1/2, 1-3/4 & 2 Inch with Guide & Case – Granite Countertops

• 3-Piece Set: 1-1/2, 1-3/4 and 2 inch diamond hole saws.
• Foam Positioning Guide: Stabilizes the bit and holds cooling water.
• Triple Diamond Coating: Fast, clean cuts with water.
• 1-3/8 Inch Cutting Depth: Handles standard 3 cm countertops.
• PU Case: Keeps the set and guide together.

• Materials: Porcelain, ceramic tile, glass, granite, quartz, marble and natural stone, plus mirrors.
• Tool Compatibility: Standard corded and cordless drills with a 3/8 inch or larger chuck.
• Not For: Concrete, masonry block, wood or metal. Do not use hammer mode.

• Place the Guide: Set the foam guide on your mark and choose the hole for your bit size.
• Add Water: Wet the guide and the surface. The foam holds water around the cut to keep the bit cool.
• Drill at Low Speed: Start slowly with light, steady pressure and let the diamonds do the work.
• Keep It Wet: Keep adding water until you break through. Don't use hammer mode.

• Kitchen Faucets: Faucet holes in granite and quartz countertops.
• Soap Dispensers: Dispenser and accessory holes.
• Water Systems: Filter and water line holes.
• Tile: Large fixture holes in porcelain tile.

• Sizes: 1-1/2, 1-3/4 and 2 inch
• Pieces: 3 hole saws
• Depth of Cut: 1-3/8 inches
• Shank: 3/8 inch
• Cutting Edge: Triple-layer electroplated diamond
• Included: 3 hole saws, foam guide, PU case
• Use Type: Wet drilling

Q: What sizes are included?
A: 1-1/2, 1-3/4 and 2 inch.
Q: Is it deep enough for my countertop?
A: Yes for typical 3 cm countertops. The cutting depth is 1-3/8 inches.
Q: Do I need a pilot hole?
A: No. The foam guide centers the bit and holds water, so you can start right on your mark.
Q: Do I need water?
A: Yes. These are wet-use diamond bits. Keep the cut wet the whole time to cool the bit, control dust and get a clean, chip-free hole.