2-3/4 Inch Dry Core Diamond Hole Saw for Brick & Concrete

• Materials: Brick walls, concrete blocks, stucco, foundation slabs, natural stone, cinder block, and pavers.
• Tool Compatibility: Works with all standard 3/8" or 1/2" corded and cordless drills (DeWalt, Milwaukee, Ryobi, Makita).
• Pro Series Tip: For sizes in this series that do not include a guide, we recommend creating a simple template out of scrap wood to ensure a perfect start.
• Warning: Not recommended for glass, mirrored surfaces, or delicate decorative tiles.

• Drill Mounting: This bit features a universal 3/8 inch shank that fits directly into any standard corded or cordless power drill. No specialized adapters are required.
• Starting the Cut: Since this model does not include a mechanical guide, we recommend creating a simple guide template out of scrap wood or plastic. Alternatively, start the cut at a 45-degree angle to notch the surface, then slowly bring the tool upright to 90 degrees.
• Operating Technique: Use a steady, moderate speed. Apply light, controlled pressure and let the sintered diamond teeth do the cutting. Do not use the hammer setting on your drill.
• Heat Management: Although engineered for dry use, using a wet sponge or a small stream of water will keep the bit cool and significantly reduce dust.
• Safety Note: Avoid contact with rebar. If rebar is encountered, stop drilling immediately to prevent damage to the sintered teeth.

• HVAC & Ventilation: Ideal for creating precise entry points for 2-1/2 inch exhaust pipes and ventilation ducting.
• Plumbing & Drainage: Sized perfectly for passing heavy-duty PVC drain lines and stack pipes through foundation slabs and walls.
• Electrical Service: Create clean, oversized openings for electrical conduit bundles and service entrance cables in masonry.
• Specialty Masonry: Core drilling for fence posts, gate anchors, or structural supports in brick, stone, or cinder block.

• Hole Diameter: 2-3/4 inches
• Cutting Depth: 2 inches
• Shank Type: 3/8 inch Universal Round Shank
• Construction: Solid Steel Body with Laser-Welded Sintered Diamond Teeth
• Locator Guide: Not Included (Use scrap-wood template)
• Use Type: Dry or Wet Core

Q: What materials can this 2-3/4 inch hole saw cut?
A: It is designed for heavy-duty masonry, including concrete blocks, brick, stone foundations, pavers, marble, and granite. It can also be used on glass and fish tanks when used with water.
Q: Does it require a pilot hole?
A: No. Center pilot bits are primarily for wood or metal. These diamond masonry bits are designed for direct drilling. Use a template or the angled-start method to keep the bit on target.
Q: Can I use this with my cordless drill?
A: Yes. The 3/8 inch shank is the standard size for most cordless and electric hand drills.
Q: What is the maximum drilling depth?
A: This bit is optimized to drill up to 2 inches deep, making it ideal for passing through standard foundation walls and masonry blocks.