1 Inch Dry Core Diamond Hole Saw for Brick & Concrete

• Materials: Brick walls, concrete blocks, stucco, foundation slabs, natural stone, cinder block, and pavers.
• Tool Compatibility: Works with all standard 3/8" or 1/2" corded and cordless drills (DeWalt, Milwaukee, Ryobi, Makita).
• Pro Series Tip: For sizes in this series that do not include a guide, we recommend creating a simple template out of scrap wood to ensure a perfect start.
• Warning: Not recommended for glass, mirrored surfaces, or delicate decorative tiles.

• Drill Mounting: This bit features a universal 3/8 inch shank that fits directly into any standard corded or cordless power drill. No specialized adapters are required.
• Starting the Cut: Since this model does not include a mechanical guide, we recommend creating a simple guide template out of scrap wood or plastic. Alternatively, start the cut at a 45-degree angle to notch the surface, then slowly bring the tool upright to 90 degrees.
• Operating Technique: Use a steady, moderate speed. Apply light, controlled pressure and let the sintered diamond teeth do the cutting. Do not use the hammer setting on your drill.
• Heat Management: Although engineered for dry use, using a wet sponge or a small stream of water will keep the bit cool and significantly reduce dust.
• Safety Note: Avoid contact with rebar. If rebar is encountered, stop drilling immediately to prevent damage to the sintered teeth.

• Plumbing Rough-ins: Perfectly sized for installing small water supply lines and PEX tubing through masonry.
• Electrical & Data: Ideal for running single conduits or low-voltage wiring through foundation walls and brick veneer.
• Anchoring & Hardware: Drill precise holes for heavy-duty anchors, bolts, and mounting hardware in concrete slabs.
• Countertop Installation: Create clean access points for soap dispensers or filtered water lines in granite and quartz.

• Hole Diameter: 1 inch
• Cutting Depth: 2 inches
• Shank Type: 3/8 inch Universal Round Shank
• Construction: Sintered Diamond Teeth on Steel Body
• Use Type: Dry Core (No water required)
• Hammer Mode: Do Not Use

Q: Can I use this with a regular cordless drill?
A: Yes. It fits into any regular 3-jaw chuck. You do not need an SDS or rotary hammer drill.
Q: Is water cooling necessary?
A: No. This bit is designed for high-performance dry drilling, making it perfect for clean workspaces.
Q: Can I use hammer mode?
A: No. Using hammer mode can crack the diamond teeth. Always use steady, rotary-only speed.
Q: What is the maximum drilling depth?
A: This bit offers a 2-inch drilling depth, ideal for thick walls, slabs, and stone countertops.